Waveshare 7 inch Display for Raspberry Pi 4 Capacitive Touchscreen HDMI LCD (C) 1024×600 Resolution IPS with 170° View Angle Support

Brand: Waveshare

Waveshare 7 inch Display for Raspberry Pi 4 Capacitive Touchscreen HDMI LCD (C) 1024×600 Resolution IPS with 170° View Angle Support All Raspberry Pi/Windows 10/8.1/8/7 PC Monitor

Features:

• 7inch IPS screen, 1024×600 hardware resolution; Capacitive touch control;Backlight can be turned off to lower power consumption
• Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers; When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free; When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
• Note:Please set the config.txt file by adding [hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in picture)Otherwise the LCD could not work properly.
• Note:If the LCD work in abnormal states for long time, it may be broken if you don’t set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers.
• Note: There is a protective cover on the screen which may remain the scraches after we do the touch test with testing pen,you can peel it off from the green tape on the edge; to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable; BB Black: HDMI cable

Binding: Personal Computers

model number: 7inch (C)

Part Number: 7inch (C)

Details:

Features

 

• 7inch IPS screen, 1024×600 hardware resolution
• Capacitive touch control
• Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computersWhen works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
• When work as a computer monitor, supports Windows 10/8.1/8/7, five-points touch, and driver free
• Backlight can be turned off to lower power consumption

 

Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately:

 

• Raspberry Pi Zero: HDMI cable, USB-type-A-receptacle-to-Micro-B-plug-cable
• BB Black: HDMI cable

PACKAGE CONTENT

 

1. 7inch HDMI LCD (C) x 1
2. HDMI cable x 1
3. USB type A plug to micro B plug cable x 1
4. RPi screws pack (4pcs) x 1
5. Quick start sheet x1

 

 

 

 

 

 

FAQ

 

1.What should we do if there are some red lines on the edge of the screen?

 

Please adjust the config.txt file by adding [hdmi_drive=1] into the end of code

 

After that please power off the srceen and put it aside for a few hours to avoid the flickers

 

2.What should we do if there are some ghost pictures?

 

Please adjust the adjustable resistor on the back which we point out in the picture

 

And after the screen can display the desktop, rotate the resistor until it can get the best display of desktop

 

Then please leave the screen for a while,waiting for the ghost to disappear (may take several hours)

Development Resources
Wiki : www.waveshare.com/wiki/7inch_HDMI_LCD_(C)

EAN: 0614961950061

Package Dimensions: 8.3 x 5.9 x 2.1 inches